Find a Incremental Encoder

5805

  • Robust
High-resolution – for maximum accuracy. The incremental encoders 5805 / 5825 offer resolutions of up to 36000 pulses per revolution. When maximum accuracy is required, these encoders are the optimum sensor solution.
Push-pull TTL / RS422  c UL us (listing) RoHS

Strong performance
  • High shaft load capacity.
  • Maximum speed up to 12000 revolutions per minute.
  • High IP protection up to max. IP66.
Many variants
  • With RS422 or push-pull interface.
  • With cable or plug connection.
Working temperature
-20 °C ... +105 °C
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (listing), RoHS

Sendix H120

  • For large motors and generators
  • 16 mm hollow shaft, through
  • 16 mm insert shaft, cylindrical
  • 17 mm insert shaft, tapered
For heavy duty applications – extremely robust hollow shaft encoders. The incremental encoder Sendix H120 is ideal for large motors and generators. It is highly accurate and extremely robust thanks to HD-Safety-Lock™ - the Heavy Duty hollow shaft design of the latest generation with strong bearing construction and integrated bearing insulation. The double-protected shaft, the wide temperature range and the high protection enable use even under the most adverse conditions. The particularly large hollow shaft up to 28 mm, the variety of mounting solutions and connection variants offer maximum flexibility during installation.
Push-pull TTL / RS422  ATEX 2/22 RoHS

Robust
  • Integrated bearing insulation of up to 2.5 kV for reliable shaft connection.
  • Extremely high resistance due to double protection of the shaft (protective cover disc and radial shaft seal), IP66 and IP67 protection as well as seawater resistant housing.
  • High resistance to shock (200 g) and vibration (15 g).
  • High interference immunity due to fiber optic transmission technology.
Flexible
  • 3 mounting solutions: conical central mounting, cylindrical central mounting or through hollow shaft.
  • Connection via cable, M12 or M23 plug, terminal box or fiber optic cable.
  • Mounting arm on flange or cover. This means that the device can be rotated flexibly during mounting.
  • Continuous hollow shaft up to 28 mm
Shaft
16 mm hollow shaft, through , 16 mm insert shaft, cylindrical, 17 mm insert shaft, tapered
Connections
Fiber optics
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX 2/22, RoHS

Sendix 7014FS2

  • Pressure-resistant enclosure
  • Also for maritime areas
  • 12 mm shaft, with locknut
Explosion protection and functional safety up to SIL2/PLd. Explosion protection and functional safety technology in one device. Sendix 7014FS2 incremental encoders are suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. In addition, these encoders offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum.
SinCos ATEX / IECEx 1/21  TÜV Reihnland Logo DGUV IFA  SIL2/PLd RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL2 according to EN 61800-5-2.
  • Suitable for applications up to PLd according to EN ISO 13849-1.
  • With incremental SinCos traces.
  • Certified mechanical mounting and electronics.
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Shaft
12 mm shaft, with locknut
Flange
Ø 70.00 mm
Working temperature
-40 °C ... +60 °C
Weight
1500 g
Interfaces
SinCos
Approvals
ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, RoHS

Sendix 5814FS2

  • For safe drive technology
  • Certified solution
  • 10 mm shaft, feather key
Functional safety: safe speed measuring up to SIL2//PLd. The incremental encoders Sendix 5814FS2 / 5834FS2 with SinCos interface are designed for use in safety-related applications up to SIL2 in accordance with EN 61800-5-2 or PLd according to EN ISO 13849-1. For applications in the field of safe drive technology, these encoders ensure reliable operation.
SinCos  ATEX 2/22  TÜV Reihnland Logo DGUV IFA  SIL2/PLd  c UL us (listing) RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL2 according to EN 61800-5-2.
  • Suitable for applications up to PLd according to EN ISO 13849-1.
  • With incremental SinCos traces.
  • Certified mechanical mounting and electronics.
Flexible
  • Shaft and hollow shaft variants.
  • Cable and connector variants.
  • Different mounting variants available.
Shaft
10 mm shaft, feather key
Working temperature
-40 °C ... +90 °C
Weight
450 g
Interfaces
SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS
Flange
Ø 287.00 mm
Interfaces
SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS

5821

  • 22 mm hollow shaft, through
Large hollow shaft in standard dimension of 58 mm Optimized proportions, optimized costs: With a total diameter of only 58 millimeters, the 5821 series has a hollow shaft with a diameter of up to 28 millimeters.
Push-pull TTL / RS422 RoHS

Variable
  • Through hollow shaft from 16 mm to 28 mm.
  • With cable connection or M12 plug.
  • High resolution up to 5000 pulses per revolution.
Shaft
22 mm hollow shaft, through
Speed
2.500 min-1
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

A02H

  • Extremely robust
  • 1 1/4 " hollow shaft, through
Heavy Duty: Extremely robust encoders with hollow shaft up to 42 mm. The A02H incremental heavy-duty encoder impresses with its extreme robustness and compact design with a through hollow shaft up to 42 mm. Due to its special design, it is perfect for any application with very harsh environmental conditions.
Push-pull TTL / RS422 SinCos  ATEX 2/22  c UL us (listing) RoHS German Lloyd

Heavy duty and robust
  • Special shaft connection with blocked bearings.
  • Balanced stainless steel clamping ring.
  • Optional insulation inserts are available to protect against shaft currents.
Compact and versatile
  • Installation depth of just 49 mm.
  • With cable connection, M12, M23 or MIL plug connection.
  • With push-pull, RS422 or SinCos interface.
Shaft
1 1/4 " hollow shaft, through
Working temperature
-40 °C ... +80 °C
Weight
800 g
Interfaces
Push-pull, TTL / RS422, SinCos
Approvals
ATEX 2/22, c UL us (listing), RoHS, German Lloyd

A020

  • Space saving
  • Ø 100 mm
  • 20 mm hollow shaft, through
  • 24 mm hollow shaft, through
  • 25 mm hollow shaft, through
  • 28 mm hollow shaft, through
  • 30 mm hollow shaft, through
  • 38 mm hollow shaft, through
  • 40 mm hollow shaft, through
  • 42 mm hollow shaft, through
  • 1 " hollow shaft, through
Large hollow shaft up to 42 mm. The incremental encoder A020 with optical sensor technology is available with through hollow shaft up to a maximum diameter of 42 mm. With an installation depth of only 43 mm, it is ideally suited for mounting on large shafts even in tight installation situations.
Push-pull TTL / RS422 SinCos  c UL us (listing) RoHS

Compact
  • Low installation depth with large hollow shaft at the same time
  • Available with compact M12 connector
  • Torque brackets can also be implemented with a small radius
Flexible
  • With push-pull, RS422 or SinCos interface.
  • Hollow shaft from 20 mm to 42 mm as standard.
  • With cable connection, M12 or M23 plug.
Shaft
20 mm hollow shaft, through , 24 mm hollow shaft, through , 25 mm hollow shaft, through , 28 mm hollow shaft, through , 30 mm hollow shaft, through , 38 mm hollow shaft, through , 40 mm hollow shaft, through , 42 mm hollow shaft, through , 1 " hollow shaft, through
Flange
Ø 100.00 mm
Dimension
Ø 100 mm
Working temperature
-40 °C ... +70 °C
Speed
3.000 min-1
Weight
700 g
Interfaces
Push-pull, TTL / RS422, SinCos
Approvals
c UL us (listing), RoHS
Dimension
Ø 70 mm
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX 2/22, RoHS

LI20 RI20

Magnetic length measuring system, incremental – suitable for the harshest environments. The Limes LI20 / B1 contactless incremental magnetic length measuring system – consisting of the LI20 sensor head and the B1 magnetic strip – allows a resolution of up to 10 μm with a maximum distance of 1 mm between sensor and strip. For outdoor use, with a particularly sturdy aluminum housing and stainless steel cover, wide temperature range, and a UV-resistant cable. IP68 / IP69k protection, special encapsulation technology, and tested resistance to cyclic humidity and heat provide maximum reliability even in unprotected outdoor use.
Push-pull TTL / RS422 RoHS
Working temperature
-20 °C ... +80 °C
Protection level
IP68, IP69k
Connections
up to 1 m cable axial
Weight
200 g
Supply voltage
4,8...26 V DC, 4,8...30 V DC
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

Sendix 5006

  • High quality seals
  • Material resistant
Stainless steel encoders for unlimited durability. The incremental Sendix encoders 5006 / 5026 in stainless steel offer optimum material resistance and thus almost unlimited durability. Their high-quality seals, IP66 / IP67 protection, and wide temperature range ensure additional density and robustness.
Push-pull TTL / RS422  ATEX 2/22  c UL us (listing) RoHS

Durable and tight
  • IP66 / IP67 protection.
  • Sturdy stainless steel housing.
  • Wide temperature range -40 to +85°C.
  • Robust bearing construction in Safety-LockTM design for resistance to vibration and installation error.
Flexible in use
  • Compatible with all current US and European standards.
  • Supply voltage 5 to 30 V DC, various interfaces, max. 5000 pulses per revolution.
  • Compact dimensions: Outer diameter 50 mm, installation depth max. 47 mm.
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 5814FS3

Functional safety: safe speed measuring up to SIL3/PLe. The incremental encoders Sendix 5814FS3 / 5834FS3 with SinCos interface are designed for use in safety-related applications up to SIL3 in accordance withEN 61800-5-2 or PLe according to EN ISO 13849-1. For applications in the field of safe drive technology, these encoders ensure reliable operation.
SinCos  ATEX 2/22  TÜV Reihnland Logo DGUV IFA SIL3/PLe  c UL us (listing) RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL3 according to EN 61800-5-2.
  • Suitable for applications up to PLe according to EN ISO 13849-1.
  • With incremental SinCos traces.
  • Certified mechanical mounting and electronics.
Flexible
  • Shaft and hollow shaft variants
  • Cable and connector variants.
  • Different mounting variants available.
Interfaces
SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS
Shaft
8 mm hollow shaft, blind, 10 mm hollow shaft, blind, 12 mm hollow shaft, blind
Interfaces
SinCos
Approvals
c UL us (listing), RoHS

5804

Sine output with zero signal – for drive technology. The incremental encoders 5804 / 5824 have a SinCos interface. They are particularly suitable for use in drive technology. These encoders are preferably used in applications where a standard SinCos interface is sufficient.
SinCos  c UL us (listing) RoHS

High performance
  • High resolution up to 5000 pulses per revolution.
  • Maximum speed up to 12000 revolutions per minute.
  • High IP protection up to max. IP66.
Variable
  • Shaft and hollow shaft variants.
  • With cable or plug connection.
Interfaces
SinCos
Approvals
c UL us (listing), RoHS
Protection level
IP40
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (listing), RoHS

3720

  • 4 mm hollow shaft, through
  • 5 mm hollow shaft, through
  • 6 mm hollow shaft, through
  • 8 mm hollow shaft, through
  • 1/4 " hollow shaft, through
Carbon fiber-reinforced plastic housing – economical sensor solution. The incremental compact encoders 3700 / 3720 with optical sensors are available with a resolution of up to 1024 pulses per revolution. The carbon fiber reinforced plastic housing of these incremental encoders is nevertheless extremely robust and resistant. Due to their high IP protection, they are also suitable for outdoor use.
Push-pull TTL / RS422  c UL us (recognized) RoHS
Shaft
4 mm hollow shaft, through , 5 mm hollow shaft, through , 6 mm hollow shaft, through , 8 mm hollow shaft, through , 1/4 " hollow shaft, through
Flange
Ø 46.00 mm
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (recognized), RoHS

3610

  • Versatile
  • Ø 36 mm
  • 5 mm shaft, round
Suitable for tight installation spaces. The incremental compact encoders 3610 / 3620 with optical sensors are available up to a resolution of 2500 pulses per revolution. The versions with through hollow shaft are designed for diameters up to 8 mm.
Push-pull TTL / RS422  c UL us (listing) RoHS

Compact
  • Only 36 mm and 38 mm outside diameter.
  • Continuous hollow shaft up to 8 mm.
  • Ideally suited for limited installation space.
Versatile
  • Available with cable outlet or M12 plug.
  • Maximum resolution 2500 pulses per revolution.
  • Supply voltage 5 to 18 V DC or 8 to 30 V DC.
Shaft
5 mm shaft, round
Flange
Ø 36.00 mm, Ø 36.50 mm
Dimension
Ø 36 mm
Connections
M12 connector axial, M12 connector radial
Weight
80 g
Supply voltage
5...18 V DC
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (listing), RoHS

5803

  • Heat resistant
  • High speed
  • Reliable
  • Ø 58 mm
High temperature up to max. 110°C The incremental encoders of the high temperature series 5803 / 5823 can be used up to max. 110°C. The high heat resistance and high speed make these encoders the ideal solution for all applications in an environment of very high temperatures.
Push-pull TTL / RS422  c UL us (listing) RoHS

Powerful
  • Suitable for temperatures up to max. 110°C.
  • High resolution with up to 5000 pulses per revolution.
  • Maximum speed of 12000 revolutions per minute.
Flexible
  • Different connection types for different applications.
  • Shaft and hollow shaft variants
  • With push-pull or RS422 interface.
Dimension
Ø 58 mm
Working temperature
-20 °C ... +110 °C
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (listing), RoHS

3700

  • Compact solution
  • Economical
  • Resilient
  • Ø 37 mm
  • 4 mm shaft, with flat surface
  • 8 mm shaft, with flat surface
Carbon fiber-reinforced plastic housing – economical sensor solution. The incremental compact encoders 3700 / 3720 with optical sensors are available with a resolution of up to 1024 pulses per revolution. The carbon fiber reinforced plastic housing of these incremental encoders is nevertheless extremely robust and resistant. Due to their high IP protection, they are also suitable for outdoor use.
Push-pull TTL / RS422  c UL us (recognized) RoHS

Reliable
  • Tube Tech® cable outlet with extremely high strain relief.
  • Also suitable for outdoor use due to the high IP protection.
Versatile
  • Continuous hollow shaft up to 8 mm.
  • Only 37 mm diameter dimension.
  • Up to 1024 pulses per revolution.
Shaft
4 mm shaft, with flat surface, 8 mm shaft, with flat surface
Flange
Ø 36.80 mm, Ø 37.00 mm, Ø 40.00 mm
Dimension
Ø 37 mm
Working temperature
-20 °C ... +70 °C
Speed
6.000 min-1
Weight
100 g
Supply voltage
5...30 V DC, 10...30 V DC
Interfaces
Push-pull, TTL / RS422
Approvals
c UL us (recognized), RoHS

2400

  • Ideal for small devices
  • Robust bearing structure
  • Adaptable
  • Ø 24 mm
  • 4 mm shaft, round
  • 6 mm shaft, round
  • 5 mm shaft, with flat surface
  • 6 mm shaft, with flat surface
  • 1/4 " shaft, with flat surface
Ideal for the tightest installation spaces: Optical miniature encoders. The 2400 / 2420 incremental miniature encoders with their optical sensor technology provide a resolution of up to 1024 pulses per revolution.With a diameter of only 24 mm, these encoders are particularly suitable for use in confined spaces.
Push-pull  c UL us (listing) RoHS

Reliable
  • Robust bearing structure
  • Multiple clamping gives the cable outlet a high strain relief
  • Short-circuit resistant outputs
Versatile
  • Ideally suited for use in small devices
  • meet the certification requirements of the EN 50121 railway standard
Shaft
4 mm shaft, round, 6 mm shaft, round, 5 mm shaft, with flat surface, 6 mm shaft, with flat surface, 1/4 " shaft, with flat surface
Flange
Ø 24.00 mm, Ø 28.00 mm, Ø 30.00 mm
Dimension
Ø 24 mm
Working temperature
-20 °C ... +85 °C
Protection level
IP50, IP64, IP65
Connections
Axial cable, Radial cable
Speed
12.000 min-1
Weight
60 g
Scanning
optical
Supply voltage
5...24 V DC, 8...30 V DC
Interfaces
Push-pull
Approvals
c UL us (listing), RoHS
Shaft
4 mm hollow shaft, blind, 6 mm hollow shaft, blind
Interfaces
Push-pull
Approvals
c UL us (listing), RoHS

2430

  • Magnetic – robust
Ideal for the tightest installation spaces: Magnetic miniature encoders. Thanks to their contactless magnetic scanning technology, the 2430 / 2440 miniature encoders guarantee exceptional robustness - and this with a resolution of up to 256 pulses.With a diameter of only 24 mm, these encoders are particularly suitable for use in confined spaces.
TTL / RS422 RoHS

Magnetic and robust
  • The contactless magnetic technology prevents wear and guarantees a long service life.
  • Multiple clamping gives the cable outlet a high strain relief and lasts longer.
  • The wide temperature range extends from -20°C to +85°C.
  • Flexible connection options: Available with radial or axial cable outlet.
Compact power
  • Resolution up to 256 pulses.
  • Shaft and hollow shaft variants
Protection level
IP67
Scanning
magnetic
Supply voltage
5 V DC
Interfaces
TTL / RS422
Approvals
RoHS

2440

Ideal for the tightest installation spaces: Magnetic miniature encoders. Thanks to their contactless magnetic scanning technology, the 2430 / 2440 miniature encoders guarantee exceptional robustness - and this with a resolution of up to 256 pulses.With a diameter of only 24 mm, these encoders are particularly suitable for use in confined spaces.
TTL / RS422 RoHS
Interfaces
TTL / RS422
Approvals
RoHS

Sendix 5020

  • 10 mm hollow shaft, through
  • 12 mm hollow shaft, through
  • 14 mm hollow shaft, through
  • 15 mm hollow shaft, through
  • 3/8 " hollow shaft, through
  • 5/8 " hollow shaft, through
  • 1/2 " hollow shaft, blind
The Standard Encoder. With special US variants. Sendix 5000 / 5020 incremental encoders offer special resistance to vibrations and installation error due to their robust bearing construction using the Safety Lock™ design. The stable die-cast housing, the high protection up to IP67 and the wide temperature range from -40°C to +85°C allow universal use. This family of encoders is subject to continuous technical development and now offers a unique variety of ordering options. Special highlight: The 24one delivery commitment: We manufacture your desired encoder in 24 hours. This free service affords you planning reliability and maximum system availability.
Push-pull TTL / RS422 Open Collector  ATEX 2/22  c UL us (listing) RoHS
Shaft
10 mm hollow shaft, through , 12 mm hollow shaft, through , 14 mm hollow shaft, through , 15 mm hollow shaft, through , 3/8 " hollow shaft, through , 5/8 " hollow shaft, through , 1/2 " hollow shaft, blind
Flange
Ø 57.20 mm, Ø 63.00 mm, Ø 65.00 mm
Connections
Cable, tangential
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 5000

  • Unique variety of variants
  • Particularly resilient
  • 24one delivery commitments
  • Ø 50 mm
  • 10 mm shaft, with flat surface
  • 11 mm shaft, with flat surface
  • 12 mm shaft, with flat surface
  • 3/8 " shaft, with flat surface
The Standard Encoder. With special US variants. Sendix 5000 / 5020 incremental encoders offer special resistance to vibrations and installation error due to their robust bearing construction using the Safety Lock™ design. The stable die-cast housing, the high protection up to IP67 and the wide temperature range from -40°C to +85°C allow universal use. This family of encoders is subject to continuous technical development and now offers a unique variety of ordering options. Special highlight: The 24one delivery commitment: We manufacture your desired encoder in 24 hours. This free service affords you planning reliability and maximum system availability.
Push-pull TTL / RS422 Open Collector  ATEX 2/22  c UL us (listing) RoHS

Robust performance
  • Increased resistance to vibrations and installation error, avoidance of machine downtime and repairs due to robust bearing construction using the Safety Lock™ design.
  • Remains leak-free even in rough everyday use, offers high safety against field failures and is suitable for outdoor use thanks to a stable die-cast housing and protection up to IP67.
  • Captive clamping ring for hollow shaft encoders.
  • Wide temperature range -40°C to +85°C.
  • High shock resistance.
  • Higher vibration resistance.
  • IP66 and IP67 protection in one version.
Many variants
  • The right connection technology for every application. Cable connection, M23, M12 and MIL plug connection.
  • Reliable installation in various mounting situations: Extensive and proven fastening options.
  • Compatible with all current US and European standards.
  • Max. 5,000 pulses / revolution.
  • Double the standard pulse numbers.
  • Variants with plug on the cable - for error-free electrical connection to your control system.
  • Additional connector variants (M12 / 5-pin, Sub-D).
  • Additional standard cable lengths.
Shaft
10 mm shaft, with flat surface, 11 mm shaft, with flat surface, 12 mm shaft, with flat surface, 3/8 " shaft, with flat surface
Flange
Ø 50.80 mm, ❏ 52.30 mm, Ø 58.00 mm, Ø 63.50 mm, ❏ 63,50 mm, Ø 115.00 mm
Dimension
Ø 50 mm
Working temperature
-40 °C ... +85 °C
Protection level
IP66
Connections
M23 connector, M23 connector radial, MIL plug connector
Weight
400 g
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
ATEX 2/22, c UL us (listing), RoHS

RLI500

  • 70 mm hollow shaft, through
RLI500 The bearingless encoder RLI500 with zero pulse, consisting of magnetic ring and sensor head, with its installation depth of min. 10 mm is ideally suited for confined installation possibilities. Its contactless measuring principle enables error-free operation even under adverse environmental conditions and a long service life. IP68 / IP69k protection, special encapsulation technology, and tested resistance to cyclic humidity and heat provide maximum reliability even in unprotected outdoor use. This bearingless encoder can be mounted on shafts up to max. 350 mm diameter.
Push-pull TTL / RS422 RoHS

RLI500

Resistant and insensitive
  • High shock and vibration resistance.
  • Sturdy housing with IP67 protection, optionally with special housing for high resistance against condensation (IP68 / IP69k, resistance against cyclic humidity per EN 60068-3-38 as well as humidity and heat per EN 60068-3-78).
  • Contactless and wear-free measuring system for long service life.
Fast commissioning
  • Function indication by LED.
  • Large mounting tolerance between magnetic ring and sensor head.
  • Requires very little installation space.
  • Easy adjustment by mounting via slotted holes.
Shaft
70 mm hollow shaft, through
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

RLI200

  • 76 mm hollow shaft, through
  • 180 mm hollow shaft, through
RLI200 The RLI200 bearingless encoder, consisting of magnetic ring and sensor head, with its installation depth of min. 10 mm is ideally suited for narrow installation possibilities. Its contactless measuring principle enables error-free operation even under adverse environmental conditions and a long service life. IP68 / IP69k protection, special encapsulation technology, and tested resistance to cyclic humidity and heat provide maximum reliability even in unprotected outdoor use. This bearingless encoder can be mounted on shafts up to max. 390 mm diameter.
Push-pull TTL / RS422 RoHS

RLI200

Resistant and insensitive
  • High shock and vibration resistance.
  • Sturdy housing with IP67 protection, optionally with special housing for high resistance against condensation (IP68 / IP69k, resistance against cyclic humidity per EN 60068-3-38 as well as humidity and heat per EN 60068-3-78).
  • Contactless and wear-free measuring system for long service life.
Fast commissioning
  • Requires very little installation space.
  • Large mounting tolerance between magnetic ring and sensor head.
  • Easy adjustment by mounting via slotted holes.
  • Function indication by LED.
Shaft
76 mm hollow shaft, through , 180 mm hollow shaft, through
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

RLI50

  • with zero signal
  • 35 mm hollow shaft, through
Bearingless encoder for shaft diameter up to 35 mm. The RLI50 bearingless encoder with zero pulse, consisting of magnetic ring and sensor head, with its installation depth of only 16 mm is ideally suited for confined installation possibilities. Its contactless measuring principle enables error-free operation even under adverse environmental conditions and a long service life. IP68 / IP69k protection, special encapsulation technology, and tested resistance to cyclic humidity and heat provide maximum reliability even in unprotected outdoor use. This bearingless encoder can be mounted on shafts up to max. 35 mm diameter.
Push-pull TTL / RS422 RoHS

RLI50

Resistant and insensitive
  • High shock and vibration resistance.
  • Sturdy housing with IP67 protection, optionally with special housing for high resistance against condensation (IP68 / IP69k, resistance against cyclic humidity per EN 60068-3-38 as well as humidity and heat per EN 60068-3-78).
  • Contactless and wear-free measuring system for long service life.
Fast commissioning
  • Function indication by LED.
  • Large mounting tolerance between magnetic ring and sensor head.
  • Requires very little installation space.
  • Easy adjustment by mounting via slotted holes.
Shaft
35 mm hollow shaft, through
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

RLI20

  • Wear-free
  • Space and cost savings
  • Contactless
  • 18 mm hollow shaft, through
Bearingless encoder for shaft diameter up to 30 mm. The RLI20 bearingless encoder, consisting of magnetic ring and sensor head, with its installation depth of only 16 mm is ideally suited for narrow installation possibilities. Its contactless measuring principle enables error-free operation even under adverse environmental conditions and a long service life. IP68 / IP69k protection, special encapsulation technology, and tested resistance to cyclic humidity and heat provide maximum reliability even in unprotected outdoor use. This bearingless encoder can be mounted on shafts up to max. 30 mm diameter.
Push-pull TTL / RS422 RoHS

Resistant and insensitive
  • High shock and vibration resistance.
  • Sturdy housing with IP67 protection, optionally with special housing for high resistance against condensation (IP68 / IP69k, resistance against cyclic humidity per EN 60068-3-38 as well as humidity and heat per EN 60068-3-78).
  • Contactless and wear-free measuring system for long service life.
Fast commissioning
  • Requires very little installation space.
  • Large mounting tolerance between magnetic ring and sensor head.
  • Easy adjustment by mounting via slotted holes.
  • Function indication by LED.
Shaft
18 mm hollow shaft, through
Interfaces
Push-pull, TTL / RS422
Approvals
RoHS

Sendix KIH50

The economical sensor solution. The Sendix KIS50 / KIH50 incremental standard encoders with optical sensors are designed for highest economic efficiency and are available up to a resolution of 5000 pulses per revolution. Special details from the sophisticated Sendix technology can be found in these encoders. This results in a high resistance to vibration and installation error. It sets new standards in cost-sensitive applications. They are ideal for standard applications and for use in simple machines.
Push-pull TTL / RS422 Open Collector RoHS
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
RoHS

Sendix KIS50

  • Ideal for simple machines
The economical sensor solution. The Sendix KIS50 / KIH50 incremental standard encoders with optical sensors are designed for highest economic efficiency and are available up to a resolution of 5000 pulses per revolution. Special details from the sophisticated Sendix technology can be found in these encoders. This results in a high resistance to vibration and installation error. It sets new standards in cost-sensitive applications. They are ideal for standard applications and for use in simple machines.
Push-pull TTL / RS422 Open Collector RoHS

Robust
  • Resistant zinc pressure die-cast housing and protection up to IP65.
  • Wide temperature range from -20°C to +70°C.
  • Prevent machine downtime thanks to robust bearing construction in "Safety-Lock™ Design".
Flexible
  • Suitable connection variants for each specific case: Cable connection, M12 connectors and M23 connectors.
  • Versatile mounting options.
  • Up to 5000 pulses per revolution.
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
RoHS
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX / IECEx 1/21, RoHS

Sendix 7120

  • 14 mm hollow shaft, blind
Safe for mining: Encoders with M2 mining approval. The incremental encoders Sendix 7100 / 7120 in a compact 70 mm stainless steel housing have an ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 5000 pulses per revolution and are available with axial and radial cable outlets. These encoders are ideally suited for potentially explosive areas in mines (above/ground underground).
Push-pull TTL / RS422 ATEX / IECEx M2 (Mining) RoHS
Shaft
14 mm hollow shaft, blind
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX / IECEx M2 (Mining), RoHS

Sendix KIH40

  • 1/4 " hollow shaft, blind
The economical sensor solution. The Sendix KIS40 / KIH40 incremental compact encoders with optical sensors are designed for maximum economy and are available with a resolution of up to 2500 pulses per revolution. Special details from the sophisticated Sendix technology can be found in these encoders. This results in a special resistance to vibrations and installation errors. It sets new standards in cost-sensitive applications. The wide performance range opens up many fields of application and is therefore particularly suitable for narrow installation spaces as well as smaller machines and devices.
Push-pull TTL / RS422 Open Collector  c UL us (listing) RoHS
Shaft
1/4 " hollow shaft, blind
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
c UL us (listing), RoHS

Sendix KIS40

  • For small devices and machines
  • Ø 40 mm
The economical sensor solution. The Sendix KIS40 / KIH40 incremental compact encoders with optical sensors are designed for maximum economy and are available with a resolution of up to 2500 pulses per revolution. Special details from the sophisticated Sendix technology can be found in these encoders. This results in a special resistance to vibrations and installation errors. It sets new standards in cost-sensitive applications. The wide performance range opens up many fields of application and is therefore particularly suitable for narrow installation spaces as well as smaller machines and devices.
Push-pull TTL / RS422 Open Collector  c UL us (listing) RoHS

Compact and robust
  • Only 40 mm outer diameter.
  • Ideally suited for limited installation space.
  • Robust bearing design in safety Lock™ design.
  • Safe commissioning: Reverse polarity protection and short-circuit proof.
Flexible
  • Maximum resolution 2500 pulses per revolution.
  • Supply voltage 5 V DC or 10 to 30 V DC.
  • Push-pull, RS422 or Open collector.
  • Cable radial or axial.
Dimension
Ø 40 mm
Speed
4.500 min-1
Weight
170 g
Interfaces
Push-pull, TTL / RS422, Open Collector
Approvals
c UL us (listing), RoHS

Sendix H100

  • Extremely robust bearing structure
  • Simple installation
  • Ø 115 mm
  • 11 mm shaft, feather key
Sendix Heavy Duty H100 The Sendix H100 is an extremely robust incremental encoder which is available in 3 versions - as a encoder with and without speed switch and as a twin encoder. The special HD-Safety-LockTM design makes it ideal for applications in heavy industry such as steel plants and cranes. Resistant materials, wide temperature ranges and high protection ensure insensitivity to the harshest environmental conditions. The innovative connection technology enables simple and quick installation.
Push-pull TTL / RS422  ATEX 2/22 RoHS

Suitable for your heavy duty application
  • HD-Safety-LockTM bearing design for extremely high bearing load capacity up to 300 N axial and 400 N radial.
  • With a temperature range of -40°C to +100°C, IP66 protection and seawater-resistant material, the encoder is resistant to harsh environmental conditions.
  • Keyway in the shaft guarantees a tight fit to the application.
  • Protection against overspeed by mechanical speed switch.
Quick and easy installation
  • Innovative, pluggable spring terminal strips in the terminal box greatly simplify cable connection and offer maximum safety.
  • Variable connection options due to the 180° rotatable connection hood.
  • A variety of resolutions and switching speeds are available as standard.
Shaft
11 mm shaft, feather key
Dimension
Ø 115 mm
Working temperature
-40 °C ... +100 °C
Connections
Terminal box
Weight
2700 g, 1800 g
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX 2/22, RoHS

Sendix 7100

  • Suitable aboveground/underground
Safe for mining: Encoders with M2 mining approval. The incremental encoders Sendix 7100 / 7120 in a compact 70 mm stainless steel housing have an ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 5000 pulses per revolution and are available with axial and radial cable outlets. These encoders are ideally suited for potentially explosive areas in mines (above/ground underground).
Push-pull TTL / RS422 ATEX / IECEx M2 (Mining) RoHS

Compact and safe
  • Installation in limited installation space possible.
  • Small installation depth, diameter 70 mm.
  • Compact cable outlet axial or radial.
  • Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
Explosion protection
  • Mining application approval.
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Weight
2800 g
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX / IECEx M2 (Mining), RoHS

Sendix 7000

Explosion protection: Encoders with ATEX / IECEx approval. The Sendix 7000 / 7020 incremental encoders offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 5000 pulses per revolution and are available with axial and radial cable outlets.
Push-pull TTL / RS422 ATEX / IECEx 1/21 RoHS

Compact and safe
  • Installation in limited installation space possible.
  • Small installation depth, diameter 70 mm.
  • Compact cable outlet axial or radial.
  • Can be used in maritime applications – housing and flange made of seawater-resistant aluminum.
  • Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Interfaces
Push-pull, TTL / RS422
Approvals
ATEX / IECEx 1/21, RoHS

Sendix 5814

  • Very high signal quality
  • Suitable as motor feedback
Highly interpolatable – ideal for drive technology. The incremental encoders Sendix 5814 / 5834 with SinCos interface are preferably used in drive technology. Due to their very high signal quality, they are ideally suited for further interpolation.
SinCos  ATEX 2/22  c UL us (listing) RoHS

Powerful
  • With incremental SinCos traces.
  • Very high signal quality.
  • Suitable for extreme applications.
Flexible
  • Shaft and hollow shaft variants.
  • Cable and connector variants.
  • Different mounting variants available.
Interfaces
SinCos
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 7014FS3

Explosion protection and functional safety up to SIL3/PLe. Explosion protection and functional safety technology in one device. Sendix 7014FS3 incremental encoders are suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. In addition, these devices offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum.
SinCos ATEX / IECEx 1/21  TÜV Reihnland Logo DGUV IFA SIL3/PLe RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL3 according to EN 61800-5-2.
  • Suitable for applications up to PLe according to EN ISO 13849-1.
  • With incremental SinCos traces.
  • Certified mechanical mounting and electronics.
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Interfaces
SinCos
Approvals
ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, RoHS
Interfaces
SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS
Sorry, there are no products in your selection.