Find a Absolute Encoder Singleturn
2470
- 4 mm hollow shaft, blind
Ideal for the tightest installation spaces. The absolute singleturn encoders 2450 / 2470 with SSI interface and magnetic sensors are specialists for the tightest installation spaces. Due to their high 12 bit resolution with 4096 different positions at 360 degrees, they offer excellent repeatability.
- Shaft
- 4 mm hollow shaft, blind
- Interfaces
- SSI, grey
- Approvals
- RoHS
5872
- 10 mm hollow shaft, through
- 12 mm hollow shaft, through
Very high word exchange rate. Encoders with parallel interface. The absolute encoders Singleturn 5852 / 5872 with parallel interface and optical sensor technology achieve a very high word exchange rate of 40 kHz at a resolution of max. 14 bits.
- Shaft
- 10 mm hollow shaft, through , 12 mm hollow shaft, through
- Approvals
- c UL us (listing), RoHS
Sendix 5853
For drive technology. Encoders with additional incremental track. The absolute encoders Singleturn Sendix 5853 / 5873 with SSI or BiSS interface and optical sensor technology achieve a resolution of max. 21 bits. These encoders are also available with an additional incremental track. Special design for attachment to direct drives in elevator technology.
Reliable and insensitive
- Robust bearing construction in safety Lock⢠Design for resistance to vibration and installation errors.
- Due to IP67 protection and wide temperature range from -40°C to +90°C also suitable for outdoor use.
- High precision with a data update of the position value ⤠1μs.
- High-resolution feedback in real time via 21-bit fully digital or incremental SinCos and RS422 outputs.
- BiSS-C Encoder Profile BP3.
- Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS up to 10 MHz.
- Weight
- 350 g
- Interfaces
- SSI + 2048 ppr SinCos, BiSS
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
5852
- High speed
- Resilient
Very high word exchange rate. Encoders with parallel interface. The absolute encoders Singleturn 5852 / 5872 with parallel interface and optical sensor technology achieve a very high word exchange rate of 40 kHz at a resolution of max. 14 bits.
Variable
- Supply voltage 5 V DC or 10 to 30 V DC.
- Cable or M23 plug connection.
- Word rate 40 kHz.
- Approvals
- c UL us (listing), RoHS
- Dimension
- Ø 58 mm
- Interfaces
- Analog 4–20 mA
- Approvals
- c UL us (listing), RoHS
- Protection level
- IP66
- Connections
- M23 connector
- Weight
- 400 g
- Approvals
- c UL us (listing), RoHS
Sendix 3671
Suitable for the toughest environments. Encoders with E1 approval. The absolute encoders Singleturn Sendix 3651 / 3671 with analog interface and magnetic sensors are particularly flexible due to their versatile interfaces and measuring ranges. A green and red LED as a reference point and error display facilitate both installation and error diagnosis. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, the Sendix are suitable for even the most demanding outdoor applications. These encoders are e1 approved by the Federal Motor Transport Authority (KBA).
- Interfaces
- Analog 0–10 V
- Approvals
- ATEX 2/22, RoHS
Sendix F3673
- 6 mm hollow shaft, through
- 8 mm hollow shaft, through
- 1/4 " hollow shaft, through
Intelligent Scan Technology⢠â powerful and economical at the same time. The absolute encoders Singleturn Sendix F3653 / F3673 with patented Intelligent Scan Technology⢠and SSI or BiSS interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a through hollow shaft up to 8 mm or a blind hollow shaft up to 10 mm is possible. The high-precision optical sensors achieve a resolution of 17 bits.
- Shaft
- 6 mm hollow shaft, through , 8 mm hollow shaft, through , 1/4 " hollow shaft, through
- Interfaces
- SSI + 2048 ppr SinCos, BiSS
- Approvals
- c UL us (listing), RoHS
Sendix F3653
- High precision
- No gears – durable
Intelligent Scan Technology⢠â powerful and economical at the same time. The absolute encoders Singleturn Sendix F3653 / F3673 with patented Intelligent Scan Technology⢠and SSI or BiSS interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a through hollow shaft up to 8 mm or a blind hollow shaft up to 10 mm is possible. The high-precision optical sensors achieve a resolution of 17 bits.
Reliable and insensitive
- Robust bearing construction in safety Lock⢠Design for resistance to vibration and installation errors.
- Due to IP67 protection and wide temperature range from -40°C to +90°C also suitable for outdoor use.
- Patented Intelligent Scan Technology⢠with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 17 bits and 100% magnetic insensitivity.
- High precision with a data update of the position value ⤠1 µs.
- High-resolution feedback in real time via SinCos and RS422 incremental outputs.
- Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS up to 10 MHz.
- Working temperature
- -40 °C ... +90 °C
- Connections
- Cable, tangential
- Scanning
- optical
- Interfaces
- SSI + 2048 ppr SinCos, BiSS
- Approvals
- c UL us (listing), RoHS
- Dimension
- Ø 36 mm
- Interfaces
- Analog 0–10 V, SSI, binary
- Approvals
- RoHS
- Interfaces
- Analog 0–10 V, SSI, binary
- Approvals
- RoHS
Sendix 3651
Suitable for the toughest environments. Encoders with E1 approval. The absolute encoders Singleturn Sendix 3651 / 3671 with analog interface and magnetic sensors are particularly flexible due to their versatile interfaces and measuring ranges. A green and red LED as a reference point and error display facilitate both installation and error diagnosis. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, the Sendix are suitable for even the most demanding outdoor applications. These encoders are e1 approved by the Federal Motor Transport Authority (KBA).
Safe applications
- Contactless measuring system for a wear-free and durable application.
- Stable die-cast housing and protection up to IP69k for particular leak resistance.
- High shock and vibration resistance for particular resilience.
- Outer diameter of only 36 mm.
- The hollow shaft version accommodates a blind hollow shaft of up to 10 mm, which can be fastened individually - via torque brackets or stator coupling.
- 360° resolved into 4096 different positions.
- For use in 12 V or 24 V automotive wiring systems.
- Working temperature
- -40 °C ... +85 °C
- Connections
- M12 connector axial
- Weight
- 200 g
- Supply voltage
- 15...30 V DC
- Interfaces
- Analog 0–10 V
- Approvals
- ATEX 2/22, RoHS
2450
- Ideal for small devices
- Ø 24 mm
- 4 mm shaft, round
- 6 mm shaft, round
- 5 mm shaft, with flat surface
Ideal for the tightest installation spaces. The absolute singleturn encoders 2450 / 2470 with SSI interface and magnetic sensors are specialists for the tightest installation spaces. Due to their high 12 bit resolution with 4096 different positions at 360 degrees, they offer excellent repeatability.
Low space requirement
- The outer diameter is 24 mm; the maximum hollow shaft diameter is 6 mm.
- Flexible connection with radial or axial cable outlet.
- Long service life and wear-free due to contactless measuring system.
- Wide temperature range from -20°C to +85°C.
- High 12-bit resolution with 4096 positions at 360°.
- Shaft
- 4 mm shaft, round, 6 mm shaft, round, 5 mm shaft, with flat surface
- Flange
- Ø 24.00 mm, Ø 28.00 mm, Ø 30.00 mm
- Dimension
- Ø 24 mm
- Working temperature
- -20 °C ... +85 °C
- Protection level
- IP50
- Speed
- 12.000 min-1
- Weight
- 60 g
- Scanning
- magnetic
- Supply voltage
- 5 V DC
- Interfaces
- SSI, grey
- Approvals
- RoHS
Sendix 7053
- Also for maritime areas
Explosion protection: Encoders with ATEX / IECEx approval. The absolute encoders Singleturn Sendix 7053 / 7073 with SSI or BiSS interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 17 bits and are available with axial and radial cable outlets.
- Working temperature
- -40 °C ... +60 °C
- Weight
- 1500 g
- Interfaces
- SSI, binary, BiSS
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix 7178
- 10 mm hollow shaft, blind
- 12 mm hollow shaft, blind
Field bus communication in mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7158 / 7178 in a compact 70 mm stainless steel housing with PROFIBUS DP interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are equipped with axial and radial radial cable outlet available.
- Shaft
- 10 mm hollow shaft, blind, 12 mm hollow shaft, blind
- Flange
- Ø 65.00 mm
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix 7078
- Particularly resilient
- 14 mm hollow shaft, blind
Explosion protection and field bus communication: Encoders with ATEX / IECEx approval. The absolute encoders Singleturn Sendix 7058 / 7078 with PROFIBUS DP interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
Compact and safe
- Installation in limited installation space possible.
- Small installation depth, diameter 70 mm.
- Compact cable outlet axial or radial.
- Can be used in maritime applications â housing and flange made of seawater-resistant aluminum.
- Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Shaft
- 14 mm hollow shaft, blind
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix M3658
- 8 mm shaft, with flat surface
For challenging outdoor uses. Extremely robust encoders. The absolute encoders Singleturn Sendix M3658 / M3678 with SAE J1939 interface support all common requirements of the special protocol for commercial vehicles and make a significant contribution to comprehensive system diagnostics or fast fault localization. The encoders can be put into operation quickly and error-free without having to set any switches; the addresses are assigned automatically by Address Claiming (ACL).
- Shaft
- 8 mm shaft, with flat surface
- Interfaces
- SAE J1939
- Approvals
- ATEX 2/22, RoHS
Sendix M3678
- Wear-free
- Magnetic – robust
- Ø 36 mm
- 6 mm hollow shaft, blind
- 8 mm hollow shaft, blind
- 1/4 " hollow shaft, blind
For challenging outdoor uses. Extremely robust encoders. The absolute encoders Singleturn Sendix M3658 / M3678 with SAE J1939 interface support all common requirements of the special protocol for commercial vehicles and make a significant contribution to comprehensive system diagnostics or fast fault localization. The encoders can be put into operation quickly and error-free without having to set any switches; the addresses are assigned automatically by Address Claiming (ACL).
Secure technology
- Increased resistance to vibration and installation errors.
- Robust bearing construction in Safety Lockplus⢠design.
- Sturdy die-cast housing and protection up to IP69k.
- Latest field bus performance in the application: SAE J1939 with CAN high-speed according to ISO 11898.
- Quick recognition of the operating status by two-color LED.
- Fast and error-free commissioning without setting switches with automatic address assignment (ACL).
- Shaft
- 6 mm hollow shaft, blind, 8 mm hollow shaft, blind, 1/4 " hollow shaft, blind
- Flange
- Ø 36.00 mm, Ø 46.00 mm
- Protection level
- IP69k
- Supply voltage
- 8...30 V DC
- Interfaces
- SAE J1939
- Approvals
- ATEX 2/22, RoHS
Sendix 5858
- 6 mm shaft, with flat surface
For field bus communication: Encoders with CANopen interface. The absolute encoders Singleturn Sendix 5858 / 5878 with CANopen interface and optical sensors can be used in all CANopen applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.
Reliable
- Excellent for applications such as mobile automation or medical technology.
- Due to IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.
- Node address configurable via rotary switch or software.
- Baud rate and termination adjustable via DIP switches or software.
- With bus hub or fixed connection and with M12 plug or cable connection.
- Connections
- M23 connector radial, Terminal box
- Interfaces
- CANopen
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5878
For field bus communication: Encoders with CANopen interface. The absolute encoders Singleturn Sendix 5858 / 5878 with CANopen interface and optical sensors can be used in all CANopen applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.
- Interfaces
- CANopen
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5878
- Minimum cycle time
- Reliable
- Latest slave stacks from Beckhoff V 5.01
- Ø 58 mm
- 15 mm hollow shaft, blind
- 1/2 " hollow shaft, blind
- 3/8 " hollow shaft, blind
For real-time communication: Industrial Ethernet encoders with EtherCAT interface. The absolute encoders Singleturn Sendix 5858 / 5878 with 2nd-generation EtherCAT interface and optical sensors can be used in all applications with EtherCAT technology. The data communication is based on CAN over EtherNet and is ideally suited for real-time applications. These encoders are available with shafts up to a maximum diameter of 10 mm or as blind hollow shafts up to 15 mm.
Reliable
- EtherCAT conformance tested.
- Integration with the latest Beckhoff slave EtherCAT stack with Version 5.01.
- With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
- Use of CoE (CAN over EtherNet).
- Real new position information due to minimum cycle time in DC mode of 62.5 μs.
- Fast, simple, error-free connection with M12 plug.
- Shaft
- 15 mm hollow shaft, blind, 1/2 " hollow shaft, blind, 3/8 " hollow shaft, blind
- Flange
- Ø 58.00 mm, Ø 63.00 mm
- Protection level
- IP65
- Connections
- M12 connector radial
- Speed
- 9.000 min-1
- Interfaces
- EtherCAT
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5858
- 1/4 " shaft, with flat surface
- 3/8 " shaft, with flat surface
For real-time communication: Industrial Ethernet encoders with EtherCAT interface. The absolute encoders Singleturn Sendix 5858 / 5878 with 2nd-generation EtherCAT interface and optical sensors can be used in all applications with EtherCAT technology. The data communication is based on CAN over EtherNet and is ideally suited for real-time applications. These encoders are available with shafts up to a maximum diameter of 10 mm or as blind hollow shafts up to 15 mm.
- Shaft
- 6 mm shaft, with flat surface, 1/4 " shaft, with flat surface, 3/8 " shaft, with flat surface
- Flange
- ❏ 63,50 mm
- Interfaces
- EtherCAT
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5858
For real-time communication: Industrial Ethernet encoders with PROFINET IO-interface. The absolute encoders Singleturn Sendix 5858 / 5878 with PROFINET IO interface and optical sensors can be used in all applications with Profinet technology. These encoders support IRT mode and are therefore ideally suited for real-time applications.
- Flange
- Ø 63.50 mm
- Weight
- 500 g
- Interfaces
- PROFINET IO
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5878
- Rapid ramp-up < 1 sec
- Isochronous Real-Time Mode
For real-time communication: Industrial Ethernet encoders with PROFINET IO-interface. The absolute encoders Singleturn Sendix 5858 / 5878 with PROFINET IO interface and optical sensors can be used in all applications with Profinet technology. These encoders support IRT mode and are therefore ideally suited for real-time applications.
Reliable
- Suitable for all Profinet applications by using the encoder profile 4.1.
- With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
- Use in IRT mode.
- Cycle time ⤠1 ms.
- Firmware updater allows easy extension of features without disassembling the encoder.
- Fast, simple, error-free connection with M12 plug.
- Interfaces
- PROFINET IO
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 7058
Explosion protection and field bus communication: Encoders with ATEX / IECEx approval. The absolute encoders Singleturn Sendix 7058 / 7078 with PROFIBUS DP interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix 7158
- Pressure-resistant enclosure
- Suitable aboveground/underground
- Latest encoder profile
- Ø 70 mm
- 10 mm shaft, with flat surface
- 12 mm shaft, with locknut
Field bus communication in mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7158 / 7178 in a compact 70 mm stainless steel housing with PROFIBUS DP interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are equipped with axial and radial radial cable outlet available.
Compact and safe
- Installation in limited installation space possible.
- Small installation depth, diameter 70 mm.
- Compact cable outlet axial or radial.
- Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
- Mining application approval.
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Shaft
- 10 mm shaft, with flat surface, 12 mm shaft, with locknut
- Flange
- Ø 70.00 mm
- Protection level
- IP67
- Connections
- Axial cable, Radial cable
- Speed
- 6.000 min-1
- Supply voltage
- 10...30 V DC
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix M3678
For challenging outdoor uses. Extremely robust encoders. The absolute encoders Singleturn Sendix M3658 / M3678 with CANopen interface and magnetic sensors have a resolution of 14 bits. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, these encoders are suitable even for demanding outdoor applications.
- Interfaces
- CANopen
- Approvals
- ATEX 2/22, RoHS
Sendix 5873
- 14 mm hollow shaft, through
- 15 mm hollow shaft, through
- 3/8 " hollow shaft, through
- With incremental track SinCos
The standard for direct drives. Encoder with conical shaft. The absolute encoder Singleturn Sendix 5873 in the Motor-Line version with SSI or BiSS interface is predestined for mounting on direct drives. With the high fully digital 21 bit resolution or 17 bit + 2048 ppr SinCos incremental track, the drive is optimally controlled. Your benefits: Plug-and-Play during commissioning including electronic data sheet, as well as the option of setting the absolute measuring system to a predefined position value.
- Shaft
- 14 mm hollow shaft, through , 15 mm hollow shaft, through , 3/8 " hollow shaft, through
- Flange
- Ø 72.00 mm
- Connections
- Circuit board connector
- Interfaces
- SSI + 2048 ppr SinCos, BiSS
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 7078
Explosion protection and field bus communication: Encoders with ATEX / IECEx approval. The absolute singleturn Sendix 7058 / 7078 encoders with CANopen interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
- Interfaces
- CANopen
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix 7073
Explosion protection: Encoders with ATEX / IECEx approval. The absolute encoders Singleturn Sendix 7053 / 7073 with SSI or BiSS interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 17 bits and are available with axial and radial cable outlets.
- Interfaces
- SSI, binary, BiSS
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix 7173
Safe for mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7153 / 7173 in a compact 70 mm stainless steel housing with SSI or BiSS interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 17 bits and are available with axial and radial cable outlets.
- Interfaces
- SSI, binary, BiSS
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix 7178
Field bus communication in mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7158 / 7178 in a compact 70 mm stainless steel housing with CANopen interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
- Speed
- 3.000 min-1
- Interfaces
- CANopen
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix F5878
For real-time communication: Industrial Ethernet encoders with EtherCAT/IP interface. The absolute encoders Singleturn Sendix F5858 / F5878 with EtherNet/IP interface and a resolution of up to 16 bits are designed for time-critical applications. Thanks to their special features, due to the patented Intelligent Scan Technologyâ¢, they not only support the performance and availability of your plant, but also make a major contribution to saving time and money.
- Interfaces
- EtherNet/IP
- Approvals
- c UL us (listing), RoHS
Sendix F5858
- Powerful – RPI time of 1 ms
For real-time communication: Industrial Ethernet encoders with EtherCAT/IP interface. The absolute encoders Singleturn Sendix F5858 / F5878 with EtherNet/IP interface and a resolution of up to 16 bits are designed for time-critical applications. Thanks to their special features, due to the patented Intelligent Scan Technologyâ¢, they not only support the performance and availability of your plant, but also make a major contribution to saving time and money.
Latest EtherNet/IP functionality
- Fast, simple commissioning and configuration possible using cyclic services.
- Low RPI time of at least 1 ms - thus the encoder can be used for time-critical applications up to 1000 Hz update frequency.
- Fast start of the encoder after applying the power supply - this increases the system performance.
- Robust bearing construction in Safety-Lock⢠design for resistance to vibration and installation errors.
- Through the implementation of DLR (Device Level Ring), a single cable break does not cause the plant to come to a standstill.
- Wide temperature range -40°C to +80°C.
- Speed
- 8.000 min-1
- Interfaces
- EtherNet/IP
- Approvals
- c UL us (listing), RoHS
Sendix 7158
Field bus communication in mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7158 / 7178 in a compact 70 mm stainless steel housing with CANopen interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
Compact and safe
- Installation in limited installation space possible.
- Small installation depth, diameter 70 mm.
- Compact cable outlet axial or radial.
- Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
- Mining application approval.
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Interfaces
- CANopen
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix 7153
- Suitable aboveground/underground
Safe for mining: Encoders with M2 mining approval. The absolute encoders Singleturn Sendix 7153 / 7173 in a compact 70 mm stainless steel housing with SSI or BiSS interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 17 bits and are available with axial and radial cable outlets.
Compact and safe
- Installation in limited installation space possible.
- Small installation depth, diameter 70 mm.
- Compact cable outlet axial or radial.
- Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
- Mining application approval.
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Weight
- 2800 g
- Interfaces
- SSI, binary, BiSS
- Approvals
- ATEX / IECEx M2 (Mining), RoHS
Sendix 5858
For field bus communication: Encoders with PROFIBUS DP interface. The absolute encoders Singleturn Sendix 5858 / 5878 with PROFIBUS DP interface and optical sensors are the right solution for all Profibus applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.
Reliable
- Proven use in applications with the highest demands such as wind power or mobile automation.
- IP67 protection and a wide temperature range from -40°C to +80°C make it particularly suitable for outdoor use.
- Fast, simple, error-free connection thanks to variant with M12 plug.
- Extensive programming possibilities by using the latest encoder profile.
- Working temperature
- -40 °C ... +80 °C
- Weight
- 530 g
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix 5878
For field bus communication: Encoders with PROFIBUS DP interface. The absolute encoders Singleturn Sendix 5858 / 5878 with PROFIBUS DP interface and optical sensors are the right solution for all Profibus applications. Distributed over 360°, the maximum resolution is 16 bits. These encoders are available with blind hollow shafts up to 15 mm.
- Interfaces
- PROFIBUS DP
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
Sendix M3658
For challenging outdoor uses. Extremely robust encoders. The absolute encoders Singleturn Sendix M3658 / M3678 with CANopen interface and magnetic sensors have a resolution of 14 bits. Protected to IP69k, shock-resistant and resistant to extreme temperature fluctuations, these encoders are suitable even for demanding outdoor applications.
Secure technology
- Increased resistance to vibration and installation errors.
- Robust bearing construction in Safety Lockplus⢠design.
- Sturdy die-cast housing and protection up to IP69k.
- CANopen encoder profile DS406 V3.2.
- Quick recognition of the position status by two-color LED.
- With M12 plug or cable connection.
- Interfaces
- CANopen
- Approvals
- ATEX 2/22, RoHS
RLA50
- Space and cost savings
- Contactless
- 30 mm hollow shaft, through
Absolute contactless measuring principle, ideal for position or angle detection The RLA50 bearingless encoder, consisting of magnetic ring and sensor head, with its installation depth of only 20 mm is ideally suited for narrow installation possibilities. Its contactless measuring principle enables error-free operation even under adverse environmental conditions and a long service life. This bearingless encoder can be mounted on shafts with a diameter of 30 mm.
Efficient
- High shock and vibration resistance.
- Contactless and wear-free measuring system for
long service life. - High resolution, 16 000 measuring steps / revolution.
- Direct measurement on shaft or axis.
- Distance monitoring by LED.
- Large mounting tolerance between magnetic ring and sensor head.
- Requires very little installation space.
- Connection via M12 plug.
- Shaft
- 30 mm hollow shaft, through
- Working temperature
- -10 °C ... +70 °C
- Speed
- 1.000 min-1
- Interfaces
- CANopen, SSI, binary
Sendix 7058
Explosion protection and field bus communication: Encoders with ATEX / IECEx approval. The absolute singleturn Sendix 7058 / 7078 encoders with CANopen interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 16 bits and are available with axial and radial cable outlets.
Compact and safe
- Installation in limited installation space possible.
- Small installation depth, diameter 70 mm.
- Compact cable outlet axial or radial.
- Can be used in maritime applications - housing and flange made of seawater-resistant aluminum.
- Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Interfaces
- CANopen
- Approvals
- ATEX / IECEx 1/21, RoHS
Sendix 7053FS3
Explosion protection and functional safety up to SIL3/PLe. Explosion protection and functional safety technology in one device. The absolute singleturn encoder Sendix 7053FS3 is suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. In addition, these devices offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum.
Functional safety technology
- Encoders with independent certificate from IFA / TÃV.
- Suitable for applications up to SIL3 according to EN 61800-5-2.
- Suitable for applications up to PLe according to EN ISO 13849-1.
- SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
- Certified mechanical mounting and electronics.
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, RoHS
Sendix 5873FS3
Safe position acquisition up to SIL3/PLe. The absolute singleturn encoders 5853FS3 and 5873FS3 are suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock⢠design, the high integration density of the OptoASIC-based components and the stable die-cast housing make them perfect for demanding outdoor applications up to IP65.
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS
Sendix 5853FS3
Safe position acquisition up to SIL3/PLe. The absolute singleturn encoders 5853FS3 and 5873FS3 are suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock⢠design, the high integration density of the OptoASIC-based components and the stable die-cast housing make them perfect for demanding outdoor applications up to IP65.
Functional safety technology
- Encoders with independent certificate from IFA / TÃV.
- Suitable for applications up to SIL3 according to EN 61800-5-2.
- Suitable for applications up to PLe according to EN ISO 13849-1.
- SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
- Certified mechanical mounting and electronics.
- Shaft and hollow shaft variants.
- Cable and connector variants.
- Different mounting variants available.
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS
Sendix 7053FS2
Explosion protection and functional safety up to SIL2/PLd. Explosion protection and functional safety technology in one device. The absolute encoder Singleturn Sendix 7053FS2 is suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. In addition, this encoder offers explosion protection in a compact 70 mm housing made of seawater-resistant aluminum.
Functional safety technology
- Encoders with independent certificate from IFA / TÃV.
- Suitable for applications up to SIL2 according to EN 61800-5-2.
- Suitable for applications up to PLd according to EN ISO 13849-1.
- SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
- Certified mechanical mounting and electronics.
- Type "Flameproof enclosure".
- ATEX with EU type examination certificate.
- IECEx with Certificate of Conformity (CoC).
- Weight
- 1300 g
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, RoHS
Sendix F3678
Intelligent Scan Technology⢠â powerful and economical at the same time. The absolute encoders Singleturn Sendix F3658 / F3678 with patented Intelligent Scan Technology⢠and CANopen interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a shaft or blind hollow shaft up to 10 mm is available. Its high-precision optical electronics achieve a resolution of 16 bits.
- Interfaces
- CANopen
- Approvals
- c UL us (listing), RoHS
Sendix 5853FS2
- For safe drive technology
- Certified solution
- 10 mm shaft, feather key
Safe position acquisition up to SIL2/PLd. The absolute encoders Singleturn Sendix 5853FS2 / 5873FS2 are suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock⢠design, the high integration density of the OptoASIC-based components and the stable die-cast housing predestine them for demanding outdoor applications up to IP65.
Functional safety technology
- Encoders with independent certificate from IFA / TÃV.
- Suitable for applications up to SIL2 according to EN 61800-5-2.
- Suitable for applications up to PLd according to EN ISO 13849-1.
- SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
- Certified mechanical mounting and electronics.
- Shaft and hollow shaft variants.
- Cable and connector variants.
- Different mounting variants available.
- Shaft
- 10 mm shaft, feather key
- Weight
- 450 g
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS
Sendix 5873FS2
Safe position acquisition up to SIL2/PLd. The absolute encoders Singleturn Sendix 5853FS2 / 5873FS2 are suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock⢠design, the high integration density of the OptoASIC-based components and the stable die-cast housing predestine them for demanding outdoor applications up to IP65.
- Interfaces
- SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
- Approvals
- ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS
Sendix F3658
Intelligent Scan Technology⢠â powerful and economical at the same time. The absolute encoders Singleturn Sendix F3658 / F3678 with patented Intelligent Scan Technology⢠and CANopen interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a shaft or blind hollow shaft up to 10 mm is available. Its high-precision optical electronics achieve a resolution of 16 bits.
Reliable and insensitive
- Robust bearing construction in Safety-Lock⢠design for resistance to vibration and installation errors.
- Due to IP67 protection and wide temperature range from -40°C to +85°C also suitable for outdoor use.
- Patented Intelligent Scan Technology⢠with all single-turn and multiturn functions on one OptoASIC for highest reliability, a high resolution of up to 16 bit and 100% magnetic insensitivity.
- CANopen with current encoder profile.
- LSS services for configuring the node address and baud rate.
- Variable PDO mapping in memory.
- Interfaces
- CANopen
- Approvals
- c UL us (listing), RoHS
5876
Safe
- Their IP67 protection and wide temperature range from -20°C to +80°C enable error-free operation even under the toughest operating conditions.
- The 1.4305 stainless steel housing withstands even the most extreme external influences.
- Optionally with M12 plug or in cable version.
- Gray, binary, or BCD code for parallel interface.
- Various application possibilities due to different input options.
- Interfaces
- SSI, binary
- Approvals
- ATEX 2/22, c UL us (listing), RoHS
7031
- 12 mm shaft, with flat surface
- Shaft
- 12 mm shaft, with flat surface
- Dimension
- Ø 70 mm
- Interfaces
- Push-pull, RS485
- Approvals
- ATEX / IECEx 1/21, RoHS