Find a Absolute Encoder Multiturn

Sendix F3663

  • Ø 36 mm
  • 8 mm shaft, with flat surface
Intelligent Scan Technology™ – powerful and economical at the same time. The absolute encoders Singleturn Sendix F3663 / F3683 with patented Intelligent Scan Technology™ and SSI or BiSS interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a through hollow shaft up to 8 mm or a blind hollow shaft up to 10 mm is possible. The high-precision optical sensor technology achieves a resolution of up to 17 bit singleturn and up to 24 bit multiturn.
SSI + 2048 ppr SinCos BiSS  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Reduced number of components ensures insensitivity.
  • IP67 protection and wide temperature range from -40°C to +90°C.
  • Patented Intelligent Scan Technology™ (all single and multiturn functions on one OptoASIC) - highest reliability, high resolution up to 41 bit, 100% magnetic insensitivity.
Performance optimized
  • High precision with a data update of the position value ≤ 1 µs.
  • High-resolution feedback in real time via SinCos and RS422 incremental outputs.
  • Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS up to
    10 MHz.
Shaft
8 mm shaft, with flat surface
Flange
Ø 36.00 mm
Dimension
Ø 36 mm
Working temperature
-40 °C ... +90 °C
Weight
200 g
Scanning
optical
Supply voltage
5 V DC
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
c UL us (listing), RoHS

Sendix F3683

  • 6 mm hollow shaft, through
  • 8 mm hollow shaft, through
  • 1/4 " hollow shaft, through
Intelligent Scan Technology™ – powerful and economical at the same time. The absolute encoders Singleturn Sendix F3663 / F3683 with patented Intelligent Scan Technology™ and SSI or BiSS interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a through hollow shaft up to 8 mm or a blind hollow shaft up to 10 mm is possible. The high-precision optical sensor technology achieves a resolution of up to 17 bit singleturn and up to 24 bit multiturn.
SSI + 2048 ppr SinCos BiSS  c UL us (listing) RoHS
Shaft
6 mm hollow shaft, through , 8 mm hollow shaft, through , 1/4 " hollow shaft, through
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
c UL us (listing), RoHS

Sendix F3668

Intelligent Scan Technology™ – powerful and economical at the same time. The absolute encoders Singleturn Sendix F3668 / F3688 with patented Intelligent Scan Technology™ and CANopen interface are characterized by special robustness and compactness. With dimensions of only 36 x 42 mm, a shaft or blind hollow shaft up to 10 mm is available. The high-precision optical sensor technology achieves a resolution of up to 16 bit singleturn and up to 16 bit multiturn.
CANopen  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Reduced number of components ensures insensitivity.
  • Due to IP67 protection and wide temperature range from -40°C to +85°C also suitable for outdoor use.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100% magnetic insensitivity.
Latest fieldbus performance
  • CANopen with current encoder profile.
  • LSS services for configuring the node address and baud rate.
  • Variable PDO mapping in memory.
  • Universal Scaling Function.
Working temperature
-40 °C ... +85 °C
Interfaces
CANopen
Approvals
c UL us (listing), RoHS
Shaft
6 mm hollow shaft, blind, 8 mm hollow shaft, blind
Speed
10.000 min-1
Interfaces
CANopen
Approvals
c UL us (listing), RoHS

Sendix 5863

For challenging applications: Encoders with additional incremental track. The absolute encoders Singleturn Sendix 5863 / 5883 with SSI or BiSS interface and optical sensor technology achieve a resolution of 17 bit Singleturn and 12 bit Multiturn. In this standard size of 58 mm, a through hollow shaft up to 14 mm and a blind hole shaft up to 15 mm are possible. These encoders are also available with an additional incremental track.
SSI + 2048 ppr SinCos BiSS  ATEX 2/22  c UL us (listing) RoHS

Reliable
  • Proven use in applications with the highest demands such as wind power or mobile automation.
  • Absolutely reliable operation in the range of strong magnetic fields due to mechanical gear with optical sensor technology.
  • Tight even in rough everyday use with stable die-cast housing.
  • -40°C to +90°C: Use in a wide temperature range and IP67 protection.
Versatile
  • Available with SSI or BiSS interface and combined with SinCos incremental signals.
  • The right fastening solution or type of connection is available for every application.
  • SET button and LED for easy commissioning.
Dimension
Ø 58 mm
Weight
450 g
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
ATEX 2/22, c UL us (listing), RoHS
Shaft
3/8 " hollow shaft, through , 1/2 " hollow shaft, through
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
ATEX 2/22, c UL us (listing), RoHS
Dimension
Ø 70 mm
Working temperature
-40 °C ... +60 °C
Weight
1500 g
Interfaces
SSI, binary, BiSS
Approvals
ATEX / IECEx 1/21, RoHS

Sendix 5863FS2

  • For safe drive technology
  • Certified solution
  • 10 mm shaft, feather key
Safe position acquisition up to SIL2/PLd. The absolute encoders Singleturn Sendix 5863FS2 / 5883FS2 are suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock™ design, the high integration density of the OptoASIC-based components and the stable die-cast housing make them perfect for demanding outdoor applications up to IP65.
SSI + 2048 ppr SinCos BiSS + 2048 ppr SinCos  ATEX 2/22  TÜV Reihnland Logo DGUV IFA  SIL2/PLd  c UL us (listing) RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL2 according to EN 61800-5-2.
  • Suitable for applications up to PLd according to EN ISO 13849-1.
  • SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
  • Certified mechanical mounting and electronics.
Flexible
  • Shaft and hollow shaft variants.
  • Cable and connector variants.
  • Different mounting variants available.
Shaft
10 mm shaft, feather key
Interfaces
SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS
Interfaces
SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, c UL us (listing), RoHS

Sendix 5868

For field bus communication: Encoders with PROFIBUS DP interface. The absolute encoders Multiturn Sendix 5868 / 5888 with PROFIBUS DP interface and optical sensors are suitable for all Profibus applications.With a maximum resolution of 28 bits, these encoders are also available in a version with blind hollow shaft up to 15 mm.
PROFIBUS DP  ATEX 2/22  c UL us (listing) RoHS

Reliable
  • Proven use in applications with the highest demands such as wind power or mobile automation.
  • Absolutely reliable operation in the range of strong magnetic fields due to mechanical gear with optical sensor technology.
Flexible
  • Fast, simple, error-free connection thanks to variant with M12 plug.
  • Extensive programming possibilities by using the latest encoder profile.
Working temperature
-40 °C ... +80 °C
Weight
570 g
Interfaces
PROFIBUS DP
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 7063FS2

Explosion protection and functional safety up to SIL2/PLd. Explosion protection and functional safety technology in one device. The absolute multiturn encoder Sendix 7063FS2 is suitable for use in safety-related applications up to SIL2 according to EN 61800-5-2 or PLd according to EN ISO 13849-1. In addition, this encoder offers explosion protection in a compact 70 mm housing made of seawater-resistant aluminum.
SSI + 2048 ppr SinCos BiSS ATEX / IECEx 1/21  TÜV Reihnland Logo DGUV IFA  SIL2/PLd RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL2 according to EN 61800-5-2.
  • Suitable for applications up to PLd according to EN ISO 13849-1.
  • SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
  • Certified mechanical mounting and electronics.
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Weight
1300 g
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL2/PLd, RoHS

Sendix F5863

Intelligent Scan Technology™ – powerful and economical at the same time. The absolute encoders Multiturn Sendix F5863 / F5883 with patented Intelligent Scan Technology™ and SSI or BiSS interface are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 41 bit total resolution, through hollow shaft up to 15 mm and variants with additional SinCos or RS422 incremental track.
SSI + 2048 ppr SinCos BiSS  ATEX 2/22  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Due to IP67 protection and wide temperature range from -40°C to +85°C also suitable for outdoor use.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 41 bit and 100% magnetic insensitivity.
Versatile
  • Available with SSI or BiSS interface and combined with SinCos incremental signals.
  • The right fastening solution or type of connection is available for every application.
  • Set button and LED for easy commissioning.
  • High-resolution feedback in real time via SinCos and RS422 incremental outputs.
  • Short control cycles, clock frequency SSI up to 2 MHz / BiSS up to 10 MHz.
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 5863FS3

Safe position acquisition up to SIL3/PLe. The absolute singleturn encoders 5863FS3 / 5883FS3 are suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. The specially interlocked bearings in the Safety Lock™ design, the high integration density of the OptoASIC-based components and the stable die-cast housing make them perfect for demanding outdoor applications up to IP65.
SSI + 2048 ppr SinCos BiSS + 2048 ppr SinCos  ATEX 2/22  TÜV Reihnland Logo DGUV IFA SIL3/PLe  c UL us (listing) RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL3 according to EN 61800-5-2.
  • Suitable for applications up to PLe according to EN ISO 13849-1.
  • SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
  • Certified mechanical mounting and electronics.
Flexible
  • Shaft and hollow shaft variants.
  • Cable and connector variants.
  • Different mounting variants available.
Interfaces
SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS
Interfaces
SSI + 2048 ppr SinCos, BiSS + 2048 ppr SinCos
Approvals
ATEX 2/22, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, c UL us (listing), RoHS

Sendix 7063FS3

Explosion protection and functional safety up to SIL3/PLe. Explosion protection and functional safety technology in one device. The absolute multiturn encoders 7063FS3 of the Sendix SIL family are suitable for use in safety-related applications up to SIL3 according to EN 61800-5-2 or PLe according to EN ISO 13849-1. In addition, these devices offer explosion protection in the compact 70 mm housing of seawater-resistant aluminum.
SSI + 2048 ppr SinCos BiSS ATEX / IECEx 1/21  TÜV Reihnland Logo DGUV IFA SIL3/PLe RoHS

Functional safety technology
  • Encoders with independent certificate from IFA / TÜV.
  • Suitable for applications up to SIL3 according to EN 61800-5-2.
  • Suitable for applications up to PLe according to EN ISO 13849-1.
  • SSI or BiSS interface with incremental SinCos tracks with 2048 ppr.
  • Certified mechanical mounting and electronics.
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
ATEX / IECEx 1/21, TÜV Reihnland, Logo DGUV IFA, SIL3/PLe, RoHS

Sendix 7168

Field bus communication in mining: Encoders with M2 mining approval. The absolute multiturn encoders Sendix 7168 / 7188 in a compact 70 mm stainless steel housing with CANopen interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a total resolution of up to 28 bit and are available with axial and radial cable outlet available.
CANopen ATEX / IECEx M2 (Mining) RoHS

Compact and safe
  • Installation in limited installation space possible.
  • Small installation depth, diameter 70 mm.
  • Compact cable outlet axial or radial.
  • Remains tight even in rough everyday use and offers high protection against field failures (IP67 protection)
Explosion protection
  • Mining application approval.
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Interfaces
CANopen
Approvals
ATEX / IECEx M2 (Mining), RoHS

Sendix M3663

  • Wear-free
  • Magnetic – robust
Energy Harvesting Technology: Electronic multiturn encoders. The absolute encoders Multiturn Sendix M3663 / M3683 with SSI interface and magnetic sensor technology are based on Energy Harvesting Technology and are equipped without gears and without battery. This makes them particularly robust, durable and cost-efficient. With their high IP67 protection, these encoders provide reliable operation in the harshest environments. Their compact design of only 36 mm allows easy installation in confined spaces.
SSI, binary  ATEX 2/22  c UL us (listing) RoHS

Highest robustness
  • Robust bearing construction in safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • High IP67 and IP69k protection in one device.
  • Wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Applications
  • Absolute accuracy ±1°.
  • Repeat accuracy ±0.2°.
  • Short control cycles, clock frequency at SSI up to 2 MHz.
  • Resolution max. 38 bit (14 bit ST + 24 bit MT).
Scanning
magnetic
Interfaces
SSI, binary
Approvals
ATEX 2/22, c UL us (listing), RoHS
Interfaces
SSI, binary
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix M3661

Energy Harvesting Technology: Electronic multiturn encoders. The absolute encoders Multiturn Sendix M3661 / M3681 with analog output and magnetic sensor technology are based on Energy Harvesting Technology and are equipped without gears or battery. This makes them particularly robust, durable and cost-efficient. With their high IP67 protection, these encoders provide reliable operation in the harshest environments. Their compact design of only 36 mm allows easy installation in confined spaces.
Analog 0–10 V  ATEX 2/22  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Reduced number of components ensures insensitivity.
  • IP67 protection and wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Applications
  • Current output 4 to 20 mA.
  • Voltage output 0 to 10 V or 0 to 5 V
  • Scalable measuring range.
  • Limit switch function.
Supply voltage
15...30 V DC
Interfaces
Analog 0–10 V
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix M3661R

  • Standalone operation in emergency
Energy Harvesting Technology: Electronic multiturn encoders – extremely robust! The absolute encoder Multiturn Sendix M3661R with analog output and magnetic sensor is based on Energy Harvesting Technology and is equipped without gears or battery. Special features include an extremely robust design, very high protection, and high bearing load. A stainless steel version is available for maximum robustness and seawater resistance. This encoder provides a superior and durable performance in the harshest environments.
Analog 0–10 V  c UL us (listing) RoHS

Highest robustness
  • Robust bearing construction in safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • High IP67 and IP69k protection in one device.
  • Wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Applications
  • Current output 4 to 20 mA.
  • Voltage output 0 to 10 V or 0 to 5 V
  • Scalable measuring range.
  • Limit switch function.
Flange
Ø 42.00 mm
Protection level
IP66, IP69k
Interfaces
Analog 0–10 V
Approvals
c UL us (listing), RoHS
Speed
4.000 min-1
Interfaces
SSI, binary
Approvals
c UL us (listing), RoHS
Interfaces
SSI, binary, BiSS
Approvals
ATEX / IECEx 1/21, RoHS

Sendix F5883M

  • Space and cost savings
  • Only 43 mm installation depth
For drive technology: Flattest multiturn encoders The absolute encoder Multiturn Sendix F5883M in the Motor-Line version is particularly characterized by its small installation depth of only 43 mm with a through hollow shaft up to max. 15 mm. This opens up new possibilities for dimensioning the engine and for installation in confined spaces. With its technical features, this encoder is ideal for use in geared motors.
SSI + 2048 ppr SinCos BiSS  c UL us (listing) RoHS

Compact and robust
  • Suitable for narrow installation spaces due to low installation depth of 43 mm and tangential cable outlet.
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 41 bits and 100% magnetic insensitivity.
Versatile
  • Through hollow shaft up to max. 15 mm and clamping on flange and cover side - suitable for common drive shafts for geared motors, flexible mounting.
  • Available with SSI or BiSS interface and combined with SinCos incremental signals.
  • Set button and LED for easy commissioning.
  • High-resolution feedback in real time via SinCos and RS422 incremental outputs.
  • Short control cycles, clock frequency SSI up to 2 MHz / BiSS up to 10 MHz.
Flange
Ø 287.00 mm
Interfaces
SSI + 2048 ppr SinCos, BiSS
Approvals
c UL us (listing), RoHS

Sendix M5861

  • With 58 mm flange
Energy Harvesting Technology: Electronic multiturn encoders. The Sendix M5861 absolute encoder with Energy Harvesting Technology and analog output is an electronic multiturn encoder without gears and without battery - in standard format with 58 mm flange. Due to its high robustness and high resolution, it is ideally suited for use in demanding applications.
Analog 0–10 V  ATEX 2/22 RoHS

Highest robustness
  • Robust bearing construction in safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • Wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Applications
  • Current output 4 to 20 mA.
  • Voltage output 0 to 10 V or 0 to 5 V
  • Scalable measuring range.
  • Limit switch function.
Interfaces
Analog 0–10 V
Approvals
ATEX 2/22, RoHS

Sendix M5863

Energy Harvesting Technology: Electronic multiturn encoders. The Sendix M5863 absolute encoder with Energy Harvesting Technology and SSI interface is an electronic multiturn encoder without gears and without battery - in standard format with 58 mm flange. Due to its high robustness and high resolution, it is ideally suited for use in demanding applications.
SSI, binary RoHS

Highest robustness
  • Robust bearing construction in safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • Wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Applications
  • Absolute accuracy ±1°.
  • Repeat accuracy ±0.2°.
  • Short control cycles, clock frequency at SSI up to 2 MHz.
  • Resolution max. 38 bit (14 bit ST + 24 bit MT).
Interfaces
SSI, binary
Approvals
RoHS

Sendix F5868

  • Powerful – RPI time of 1 ms
F5868 / F5888 EtherNet/IP The absolute encoders Singleturn Sendix F5868 / F5888 with EtherNet/IP interface and a resolution of up to 16 bits are designed for time-critical applications. Thanks to their special features, due to the patented Intelligent Scan Technology™, they not only support the performance and availability of your plant, but also make a major contribution to saving time and money.
EtherNet/IP  c UL us (listing) RoHS

Latest EtherNet/IP functionality
  • Fast, simple commissioning and configuration via cyclic services possible.
  • Low RPI time of at least 1 ms - thus the encoder can be used for time-critical applications up to 1000 Hz update frequency.
  • Fast start of the encoder after applying the power supply - this increases the system performance.
Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100% magnetic insensitivity.
  • Through the implementation of DLR (Device Level Ring), a single cable break does not cause the plant to come to a standstill.
Speed
8.000 min-1
Interfaces
EtherNet/IP
Approvals
c UL us (listing), RoHS

Sendix F5888M

Sendix F5888M Motor-Line The absolute encoder Multiturn Sendix F5888M in the Motor-Line version with CANopen interface is particularly characterized by its small installation depth of only 43 mm with a through hollow shaft up to max. 15 mm. This opens up new possibilities for dimensioning the engine and for installation in confined spaces. With its technical features, this encoder is ideal for use in geared motors.
CANopen  c UL us (listing) RoHS

Compact and robust
  • Suitable for narrow installation spaces due to low installation depth of 43 mm and tangential cable outlet.
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 41 bits and 100% magnetic insensitivity.
Latest field bus performance
  • CANopen with current encoder profile.
  • LSS services for configuring the node address and baud rate.
  • Variable PDO mapping in memory.
  • Universal Scaling Function.
  • 32 bit total resolution (16 bit MT + 16 bit ST).
Interfaces
CANopen
Approvals
c UL us (listing), RoHS

Sendix M3668

Energy Harvesting Technology: Electronic multiturn encoders. The Sendix M36 with Energy Harvesting Technology is an electronic multiturn encoder in a compact design, without gear and without battery.It is characterized by robustness, reliability and cost-efficiency.
CANopen SAE J1939  ATEX 2/22  c UL us (listing) RoHS  ATEX 2/22

Reliable and insensitive
  • Sturdy bearing construction in Safety-Lock™ design for resistance against vibration and installation errors.
  • Reduced number of components ensures insensitivity.
  • IP67 protection and wide temperature range from -40°C to +85°C.
  • Without gear and without battery, thanks to the Energy Harvesting technology.
Up-to-the-minute fieldbus performance
  • LSS services for configuration of the node address and baud rate.
  • Variable PDO mapping in the memory.
  • Universal scaling function.
  • Configuration management (bootloader).

Reliable and insensitive
  • Sturdy bearing construction in Safety-Lock™ design for resistance against vibration and installation errors.
  • Reduced number of components ensures insensitivity.
  • IP67 protection and wide temperature range from -40°C to +85°C.
  • Without gear and without battery, thanks to the Energy Harvesting technology.
Up-to-the-minute fieldbus performance
  • Up-to-the-minute fieldbus performance in the application: SAE J1939 with CAN-highspeed to ISO 11898.
  • Universal Scaling Function.
  • Fast determination of the operating status via two-color LED.
Interfaces
CANopen, SAE J1939
Approvals
ATEX 2/22, c UL us (listing), RoHS, ATEX 2/22

Sendix M3668R

Energy Harvesting Technology: Electronic multiturn encoders – extremely robust! The Sendix M36 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. It is characterized by robustness, reliability and cost-efficiency.The “R”obust version is particularly suitable for use in harsh environments. Protected up to IP69k, resistance against shock and extreme temperature fluctuations, the Sendix M36 encoder is suitable even for demanding outdoor applications.
CANopen SAE J1939  c UL us (listing) RoHS

Highest robustness
  • Robust bearing construction in safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • High IP67 and IP69k protection in one device.
  • Wide temperature range from -40°C to +85°C.
  • Energy Harvesting Technology without gears and without battery.
Up-to-the-minute fieldbus performance
  • Up-to-the-minute fieldbus performance in the application: SAE J1939 with CAN-highspeed to ISO 11898.
  • Universal Scaling Function.
  • Fast determination of the operating status via two-color LED.
Interfaces
CANopen, SAE J1939
Approvals
c UL us (listing), RoHS

Sendix M3688

Energy Harvesting Technology: Electronic multiturn encoders. The Sendix M36 with Energy Harvesting Technology is an electronic multiturn encoder in a compact design, without gear and without battery.It is characterized by robustness, reliability and cost-efficiency.
CANopen SAE J1939  ATEX 2/22  c UL us (listing) RoHS  ATEX 2/22
Interfaces
CANopen, SAE J1939
Approvals
ATEX 2/22, c UL us (listing), RoHS, ATEX 2/22

Sendix M5868

Energy Harvesting Technology: Electronic multiturn encoders. The Sendix M58 with Energy Harvesting Technology is an electronic multiturn encoder without gear and without battery – in the standard format with 58 mm flange. High robustness and high resolution make this encoder the ideal device for use in demanding applications.
CANopen SAE J1939 RoHS  c UL us (listing)

Highest robustness
  • Sturdy bearing construction in Safety-Lockplus™ design for particularly high resistance.
  • Extra large bearings.
  • Mechanically protected shaft seal.
  • Wide temperature range -40°C ... +85°C.
  • Without gear and without battery, thanks to the Energy
Up-to-the-minute fieldbus performance
  • Up-to-the-minute fieldbus performance in the application: SAE J1939 with CAN-highspeed to ISO 11898.
  • Universal Scaling Function.
  • Fast determination of the operating status via two-color LED.
Interfaces
CANopen, SAE J1939
Approvals
RoHS, c UL us (listing)

Sendix 5868

  • Rapid ramp-up < 1 sec
  • Isochronous Real-Time Mode
For real-time communication: Industrial Ethernet encoders with PROFINET IO-interface. The absolute encoders Multiturn Sendix 5868 / 5888 with PROFINET IO interface and optical sensors can be used in all applications with Profinet technology. These encoders support IRT mode and are therefore ideally suited for real-time applications.
PROFINET IO  ATEX 2/22  c UL us (listing) RoHS

Reliable
  • Suitable for all PROFINET applications by using the encoder profile 4.1.
  • With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
Flexible
  • IRT mode.
  • Cycle time ≤ 1 ms.
  • Firmware updater allows easy extension of features without disassembling the encoder.
  • Fast, simple, error-free connection with M12 plug.
Weight
540 g
Interfaces
PROFINET IO
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 5868

For field bus communication: Encoders with CANopen or CANopenLift interface. The absolute encoders Multiturn Sendix 5868 / 5888 with CANopen or CANopenLift interface and optical sensors are the right encoders for field bus applications. With a maximum resolution of 28 bits, these encoders optionally have an additional RS422 incremental track with 2048 pulses.
CANopen CANopen-Lift  ATEX 2/22  c UL us (listing) RoHS

Reliable
  • Excellent for applications such as mobile automation or medical technology.
  • With IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.
Flexible
  • Node address configurable via rotary switch or software.
  • Baud rate and termination adjustable via DIP switches or software.
  • With bus hub or fixed connection and with M12 plug or cable connection
  • Universal Scaling Function.
Connections
Sub-D connector, M23 connector radial
Interfaces
CANopen, CANopen-Lift
Approvals
ATEX 2/22, c UL us (listing), RoHS
Shaft
1/4 " hollow shaft, blind
Interfaces
CANopen, CANopen-Lift
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 5888

  • Minimum cycle time
  • Latest slave stacks from Beckhoff V 5.01
  • 10 mm hollow shaft, blind
  • 15 mm hollow shaft, blind
  • 1/2 " hollow shaft, blind
  • 3/8 " hollow shaft, blind
For real-time communication: Industrial Ethernet encoders with EtherCAT interface. The absolute encoders Multiturn Sendix 5868 / 5888 with 2nd-generation EtherCAT interface and optical sensors can be used in all applications with EtherCAT technology. The data communication is based on CAN over EtherNet and is ideally suited for real-time applications. These encoders are available with shafts up to a maximum diameter of 10 mm or as blind hollow shafts up to 15 mm.
EtherCAT  ATEX 2/22  c UL us (listing) RoHS

Reliable
  • EtherCAT conformance tested.
  • Integration with the latest Beckhoff slave EtherCAT stack with Version 5.01.
  • With IP67 protection and a robust housing construction, it is optimally suited for the toughest external operating conditions.
Flexible
  • Use of CoE (CAN over EtherNet).
  • Real new position information due to minimum cycle time in DC mode of 62.5 μs.
  • Fast, simple, error-free connection with M12 plug.
Shaft
10 mm hollow shaft, blind, 15 mm hollow shaft, blind, 1/2 " hollow shaft, blind, 3/8 " hollow shaft, blind
Flange
Ø 72.00 mm
Interfaces
EtherCAT
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix F5888

Intelligent Scan Technology™ – electronic field bus encoders. The absolute encoders Multiturn Sendix F5868 / F5888 with CANopen interface and patented Intelligent Scan Technology™ are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 32 bit total resolution, through hollow shaft up to 15 mm and CANopen functionalities according to current encoder profile.
CANopen  ATEX 2/22  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Due to IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100% magnetic insensitivity.
Latest field bus performance
  • CANopen with current encoder profile.
  • LSS services for configuring the node address and baud rate.
  • Variable PDO mapping in memory.
  • Universal Scaling Function.
  • 32 bit total resolution (16 bit MT + 16 bit ST).
Connections
Cable, tangential
Interfaces
CANopen
Approvals
ATEX 2/22, c UL us (listing), RoHS
Shaft
10 mm shaft, with flat surface, 12 mm shaft, with locknut
Flange
Ø 70.00 mm
Protection level
IP67
Connections
Axial cable, Radial cable
Speed
6.000 min-1
Supply voltage
10...30 V DC
Interfaces
PROFIBUS DP
Approvals
ATEX / IECEx M2 (Mining), RoHS

Sendix F5888

  • High precision
  • No gears – durable
  • Ø 58 mm
  • 10 mm hollow shaft, through
  • 12 mm hollow shaft, through
  • 14 mm hollow shaft, through
  • 15 mm hollow shaft, through
Intelligent Scan Technology™ – electronic field bus encoders. The absolute encoders Multiturn Sendix F5868 / F5888 with Modbus interface and patented Intelligent Scan Technology™ are particularly high-resolution optical encoders without gears with 100% magnetic insensitivity. 32 bit total resolution, through hollow shaft up to 15 mm and Modbus RTU interface.
Modbus  ATEX 2/22  c UL us (listing) RoHS

Reliable and insensitive
  • Robust bearing construction in Safety-Lock™ design for resistance to vibration and installation errors.
  • Due to IP67 protection and wide temperature range from -40°C to +80°C also suitable for outdoor use.
  • Patented Intelligent Scan Technology™ with all single and multiturn functions on one OptoASIC - thus highest reliability, a high resolution of up to 32 bit and 100 % magnetic insensitivity.
Current Modbus Performance
  • Modbus register for configuring the node address and baud rate.
  • Scaling Function.
  • 32 bit total resolution (16 bit MT + 16 bit ST).
  • Preset function.
  • Diagnostic functions.
  • Limit switch function.
Shaft
10 mm hollow shaft, through , 12 mm hollow shaft, through , 14 mm hollow shaft, through , 15 mm hollow shaft, through
Flange
Ø 58.00 mm, Ø 63.00 mm, Ø 65.00 mm, Ø 73.40 mm
Protection level
IP65
Connections
M12 connector radial
Speed
9.000 min-1
Interfaces
Modbus
Approvals
ATEX 2/22, c UL us (listing), RoHS
Shaft
6 mm shaft, with flat surface, 1/4 " shaft, with flat surface, 3/8 " shaft, with flat surface
Speed
12.000 min-1
Interfaces
Modbus
Approvals
ATEX 2/22, c UL us (listing), RoHS

Sendix 7188

  • Pressure-resistant enclosure
  • Suitable aboveground/underground
  • Latest encoder profile
  • Ø 70 mm
  • 12 mm hollow shaft, blind
  • 14 mm hollow shaft, blind
Field bus communication in mining: Encoders with M2 mining approval. The absolute encoders Multiturn Sendix 7158 / 7178 in a compact 70 mm stainless steel housing with PROFIBUS DP interface and optical sensors have ATEX/IECEx mining approval. These shock- and vibration-resistant encoders operate flexibly with a resolution of up to 28 bits and are available with axial and radial cable outlets.
PROFIBUS DP ATEX / IECEx M2 (Mining) RoHS

Compact and safe
  • Installation in limited installation space possible.
  • Small installation depth, diameter 70 mm.
  • Compact cable outlet axial or radial.
  • Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
Explosion protection
  • Mining application approval.
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Shaft
12 mm hollow shaft, blind, 14 mm hollow shaft, blind
Speed
3.000 min-1
Interfaces
PROFIBUS DP
Approvals
ATEX / IECEx M2 (Mining), RoHS

Sendix 7068

  • Particularly resilient
  • 12 mm shaft, with locknut
Explosion protection and field bus communication: Encoders with ATEX / IECEx approval. The absolute encoders Singleturn Sendix 7068 / 7088 with PROFIBUS DP interface and optical sensors offer explosion protection in a compact 70 mm housing made of seawater-resistant aluminum. These shock- and vibration-resistant encoders operate flexibly with a total resolution of up to 28 bits and are available with axial and radial cable outlets.
PROFIBUS DP ATEX / IECEx 1/21 RoHS

Compact and safe
  • Installation in limited installation space possible.
  • Small installation depth, diameter 70 mm.
  • Compact cable outlet axial or radial.
  • Can be used in maritime applications – housing and flange made of seawater-resistant aluminum.
  • Remains leak-free even in rough everyday use and offers high protection against field failures (IP67 protection).
Explosion protection
  • Type "Flameproof enclosure".
  • ATEX with EU type examination certificate.
  • IECEx with Certificate of Conformity (CoC).
Interfaces
PROFIBUS DP
Approvals
ATEX / IECEx 1/21, RoHS
Interfaces
CANopen
Approvals
ATEX 2/22, c UL us (listing)

AX

  • Resilient
  • Robust bearing structure
  • Reliable
  • 16 mm hollow shaft, through
  • 20 mm hollow shaft, through
  • 24 mm hollow shaft, through
  • 25 mm hollow shaft, through
  • 28 mm hollow shaft, through
  • 30 mm hollow shaft, through
  • 38 mm hollow shaft, through
  • 42 mm hollow shaft, through
  • 45 mm hollow shaft, through
For shaft diameters up to 45 mm: Absolute encoders multiturn The AX absolute rotary encoder can be mounted on shafts from 16 mm to max. 45 mm in diameter. It can be combined with the proven Kübler Sendix encoders with absolute interface.
Analog 0–10 V EtherNet/IP CANopen EtherCAT Modbus PROFIBUS DP PROFINET IO SSI, binary RoHS

Robust
  • Decoupling of hollow shaft and encoder.
  • Solid housing.
  • Proven torque brackets.
Flexible
  • Can be combined with all shaft encoders ø 58 mm.
  • Various variants for clamping ring attachment.
  • Three different lengths for the torque arm.
Shaft
16 mm hollow shaft, through , 20 mm hollow shaft, through , 24 mm hollow shaft, through , 25 mm hollow shaft, through , 28 mm hollow shaft, through , 30 mm hollow shaft, through , 38 mm hollow shaft, through , 42 mm hollow shaft, through , 45 mm hollow shaft, through
Protection level
IP64
Connections
M12 connector axial, M12 connector radial
Speed
4.500 min-1
Interfaces
Analog 0–10 V, EtherNet/IP, CANopen, EtherCAT, Modbus, PROFIBUS DP, PROFINET IO, SSI, binary
Approvals
RoHS
Sorry, there are no products in your selection.